AWAPUR 2.5 2K polyurethane casting resin 1 kg (2 x 500 g)

Polyurethane quick casting resin (Resin) Liquid, white synthetic resin for the production of cast resin bodies with the hardness Shore D 70. The processing time is 2.5 minutes at 25 ° Celsius. The demolding time is approx. 30 min.

Characteristics:

High-quality, low-odor 2-component casting resin in a mixing ratio (weight) of 1: 1 of the base and the hardener.
Very good flowability
High impact resistance and breaking strength
Good machinability, easy to grind and drill
High quality ingredients (Made in Germany)
High accuracy and detail
Short demolding time
Scope of application:

Potting and production of universal shapes and models of all kinds.

Excellent for pouring out WAGNESIL silicone rubber impressions

AWAPUR 2.5 2K polyurethane casting resin

Polyurethane quick casting resin (Resin) Liquid, white synthetic resin for the production of cast resin bodies with the hardness Shore D 70. The processing time is 2.5 minutes at 25 ° Celsius. The demolding time is approx. 30 min.

Characteristics:

High-quality, low-odor 2-component casting resin in a mixing ratio (weight) of 1: 1 of the base and the hardener.
Very good flowability
High impact resistance and breaking strength
Good machinability, easy to grind and drill
High quality ingredients (Made in Germany)
High accuracy and detail
Short demolding time
Scope of application:

Potting and production of universal shapes and models of all kinds.

Excellent for pouring out WAGNESIL silicone rubber impressions

 

Eigenschaften unvernetzt                           Basis Härter Mischung     Farbe   beige gelblich weiß                 Mischungsverhältnis Gew.-Teile 100 100       Dichte (20 °C) g/cm  1 1,15 1,08     Viskosität (20 °C) mPa·s 75 20 40               Eigenschaften der Mischung (ca. Werte)           Verarbeitungszeit  Minuten   2,5       Entformzeit bei 25°C (RT, 100 g)           4-5 mm Minuten    10 bis 30      30-40 mm Minuten    20 bis 40                    Härte Shore D DIN 53505 70                 Eigenschaften des ausgehärteten Produktes (ca. Werte)           Zugfestigkeit MPa DIN 53455 30       Zugdehnung % DIN 53455 4       Biegefestigkeit MPa DIN 53452 46       Biegedehnung % DIN 53452 6       E-Modul aus Biegeversuch MPa DIN 53457 1.090       Schlagzähigkeit kJ/m EN ISO 179 15                             RT= Raumtemperatur           Verarbeitungshinweise           Vor Gebrauch AWAPUR gut durchmischen, bis ein homogenes Aussehen erreicht ist.      Beide Komponenten bei Raumtemperatur (>18°C) entsprechend dem angegebenen Mischungsverhältnis miteinander gut vermischen. Vor dem Vergießen sicherstellen, dass Teile und Formen frei von Feuchtigkeit und nicht abgelüftetem Trennmittel sind.                        Trennmittel finden Sie auf unserer Homepage unter www.zahntechnikshop.de