AWAPOX 2K-Epoxid casting Resin, 1,4 kg (1 kg Harz + 0,4 kg Härter)
Product no.: 42150604
Description
AWAPOX 2K epoxy casting resin, 1.4 kg (1 kg resin + 0.4 kg hardener)
Epoxy, Epoxy, Resin, Casting Resin,
Premium Quality: Crystal Clear UV Stable Modified Epoxy Resin with Hardener (2K)
Many applications including: embedding of objects, mold making, table construction (table tops), glass laminates, floor coating, worktops, model making, mold construction with GRP carbon aramid etc, shipbuilding and aircraft construction, crack filling, injections, pond construction u.v.m.
Colorable.
Mixing ratio: resin: Hardener: 100 : 40 by weight,
Cures tack-free and clear. High self-venting capability, chemical & mechanical resistance
Processing time: 210 minutes, curing: 72 hours
Excellent for pouring out WAGNESIL silicone rubber impressions
AWAPOX 2K epoxy casting resin, 1.4 kg (1 kg resin + 0.4 kg hardener)
Epoxy, Epoxy, Resin, Casting Resin,
- Premium Quality: Crystal Clear UV Stable Modified Epoxy Resin with Hardener (2K)
- Many applications including: embedding of objects, mold making, table construction (table tops), glass laminates, floor coating, worktops, model making, mold construction with GRP carbon aramid etc, shipbuilding and aircraft construction, crack filling, injections, pond construction u.v.m.
- Colorable.
- Mixing ratio resin: Hardener 100: 40 by weight,
- Cures tack-free and clear. High self-venting capability, chemical & mechanical resistance
- Processing time: 210 minutes, curing: 72 hours
- Excellent for pouring out WAGNESIL silicone rubber impressions
Properties uncrosslinked Resin/hardener/mixture
Resin hardener mix
colour
transparent/ bluish/ transparent
Mixing ratio of parts by weight: 100 40
Density (20 ° C) g / cm: 1.1 / 0.95 /1.1
Viscosity (20 ° C) mPa s : 800/ 180/ 450
Properties of the mixture (approx. Values)
Processing time minutes: 210
Release time at 25 ° C 30-40 mm (65 g) :hours 72
Final hardness Shore D DIN 53505: 75
Bending strength MPa DIN 53452: 60
RT = room temperature
processing instructions
Thoroughly mix AWAPOX until a homogeneous appearance is achieved.
Both components at room temperature (> 18 ° C) according to the specified mixing ratio with each other
mix well. Before casting, ensure that parts and molds are free from moisture and not flashed
Release agents are.
Release agents can be found on our homepage at www.zahntechnikshop.de
Produktsicherheit CautionToxic to aquatic life with long lasting effects
Contains epoxy-containing compounds. Can cause allergic reactions
Causes skin irritation
May cause allergic skin reactions
Causes serious eye irritation